Plug & play combiner. The Midnite Solar MNPV6-MC4 have 6 fuse holders, 15 amps breaker and bulkhead mount connectors already installed and wired.

This combiner is rated for outdoor use. Designed for combining high voltage strings using 10 mm x 38 mm breakers up to 80 amps total. Designed for combining high voltage strings using 10 mm x 38 mm fuses up to 80 amps total. The use of touch safe din rail mount fuse holders and fuses allow operation up to 600 volts. The MNPV6 is rated for up to 80 amps.

Features

• Fast, convenient hook up with industry standard connectors
• All aluminum powder coated housing that won’t rust
• Flip up cover that can stay in the open position during installation
• PV negative bus bar with #6 and 1/0 connections
• Chassis ground bus bar with #6 and 1/0 connections
• Standard DIN rail with (x) 30 amp touch safe fuse holders. 15 amp fuses included.
• Tin plated copper bus bar that connect PV Plus outputs
• Dead front cover snaps into place after wiring is complete for safety
• Connectors for PV in and PV out on bottom, additional knockouts on bottom and sides
• Top surface is available to bring conduit in from directly above the enclosure